GE Fanuc - Rx3i

GE Fanuc - Rx3i

RX3i - controller and I/O products

RX3I CENTRAL PROCESSOR UNITS (CPU)

IC695CPU310
300Mhz CPU with 10Meg of memory 2 SERIAL PORTS
IC695CPU320
1Ghz CPU with 64Meg of memory 2 SERIAL PORTS
IC695CRU320
1Ghz Redundant CPU with 64Meg of memory 2 SERIAL PORTS

RX3I CPU RACKS

IC695CHS012
RX3i 12 universal modules slots base
IC695CHS016
RX3i 16 universal modules slots base

RX3I REFLECTIVE MEMORY

IC695RMX128
PACSystems RX3i Reflective Memory Xchange 128MB Memory
VMICBL-000-F5-005
50 FEET (15.24 M)

RX3I MAX-ON REDUNDANCY

IC646MXN001
Max-ON RX3i Hot Standby Redundancy Software
IC695CMU310
RX3i Redundant High Availability CPU with two built-in serial ports. The CPU has
10Meg of user memory. The CPU supports the Max- ON redundancy code.

RX3I EXPANSION MODULES

IC695LRE001
RX3i Local Expansion Module Occupies no system slots on base
IC695NKT001
RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).
ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a
IC695CHSxxx bas

RX3I EXPANSION RACKS

IC694CHS392
Base Expansion 10 Slots
IC694CHS398
Base Expansion 5 Slots

RX3I CPU POWER SUPPLIES

IC695PSD040
Power supply 24VDC 40 watts occupies one slot on system base
IC695PSD140
24VDC Multipurpose Power Supply is suitable for use in loadsharing and redundancy
application. It must be installed in a PACsystems RX3i (IC695catalog number)
Universal Backplane. It can be used as the only power supply in the backplane, or combine

IC695PSA040
RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two
slots on system base

IC695PSA140
120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing
and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplane


RX3I EXPANSION POWER SUPPLIES

IC694PWR321
Power Supply 120/240 VAC 125 VDC Standard
IC694PWR330
Power Supply 120/240 Vac 125 Vdc High Capacity
IC694PWR331
Power Supply 24 Vdc High Capacity

RX3I DISCRETE INPUT MODULES

IC694MDL230
INPUT MODULE 120 VAC 8 POINT ISOLATED
IC694MDL231
INPUT MODULE 240 VAC 8 POINT ISOLATED
IC694MDL240
INPUT MODULE 120 VAC 16 POINT
IC694MDL241
INPUT MODULE 24 VAC 16 POINT
IC694MDL250120 Vac Isolated Input (16 points). Module requires a terminal block
IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers.
Compatible high speed serial bus on both Universal Base and Standard
expansion base. Requires firmware 3.5 and

IC694MDL26032 Point 120VAC Input Module. Requires terminal block IC694TBxx32.
Compatible with RX3i only and requires firmware 3.5 and ME 5.5 or higher

IC694MDL350
120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal
block (IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers.
Compatible high speed serial bus on both Universal Base and Standard.
Requires firmware 3.5 and ME

IC694MDL632
INPUT MODULE 125 VDC 8 POINT POS/NEG LOGIC
IC694MDL634
INPUT MODULE 24 VDC 8 POINT POS/NEG LOGIC
IC694MDL645
INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC
IC694MDL646
INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER
IC694MDL654
INPUT MODULE 5/12 VDC (TTL) 32 POINT POS/NEG LOGIC
IC694MDL655
INPUT MODULE 24VDC 32 POINT POS/NEG LOGIC
IC694MDL658
INPUT 48 VDC POS/NEG 32PT FAST
IC694MDL660
RX3i 24VDC Input Module 32 point. Module is supported by serial
bus andis not limited to the universal base or expansion base. The
module requires a terminal block (IC694TBB032 box style or
IC694TBS032 spring
clamp style terminal block). Terminal

RX3I DISCRETE OUTPUT MODULES

IC694MDL310
OUTPUT MODULE 120 VAC 0.5 AMPS 12 POINT
IC694MDL330
OUTPUT MODULE 120/240 VAC 2AMPS 8 POINTS
IC694MDL340
OUTPUT MODULE 120 VAC 0.5AMPS 16 POINTS
IC694MDL390
OUTPUT MODULE 120/240 VAC 2AMPS 5 POINT ISOLATED
IC694MDL732
OUTPUT MODULE 12/24 VDC 0.5AMPS 8 POINTS POSITIVE LOGIC
IC694MDL734
OUTPUT MODULE 125VDC 1AMP 6 POINTS ISOLATED POS/NEG LOGIC
IC694MDL740
OUTPUT MODULE 12/24 VDC 0.5AMPS 16 POINTS POSITIVE LOGIC
IC694MDL741
OUTPUT MODULE 12/24 VDC 0.5AMP 16 POINT NEGATIVE LOGIC
IC694MDL742
OUTPUT MODULE 12/24 VDC 1AMP 16 POINT POSITIVE LOGIC ESCP PROTECTION
IC694MDL752
OUTPUT MODULE 5/24 VDC (TTL) 0.5AMP 32 POINT NEGATIVE LOGIC

RX3I ANALOG INPUT MODULES

IC694ALG220
INPUT MODULE ANALOG 4 POINT VOLTAGE
IC694ALG221
INPUT MODULE ANALOG 4 POINT CURRENT
IC694ALG222
INPUT MODULE ANALOG 16 SINGLE ENDED 8 DIFFERENTIAL VOLTAGE
IC694ALG223
INPUT MODULE ANALOG 16 SINGLE ENDED CURRENT
IC695ALG106
Isolated Analog module, 6 individual isolated channels are configurable for
voltage and current

IC695ALG112
Isolated Analog module, 12 individual isolated channels are configurable for
voltage and current

IC695ALG306
Isolated Thermocouple Input module provides six isolated differential
thermocouple input channels

IC695ALG312
Isolated Thermocouple Input module provides twelve isolated differential
thermocouple input channels

IC695ALG508
Isolated RTD Input module provides eight isolated differential RTD
input channels

IC695ALG600
UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG
CONFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE,
CURRENT, OR VOLTAGE. 2 ISOLATED GROUPS, 4 CHANNELS
PER GROUP. Terminal block ordered separately.

IC695ALG608
Analog Input module, 8 channels single ended, 4 channels differential,
channels are configurable for voltage and current. Can be configured for
Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.

IC695ALG616
Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA;
Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.

IC695ALG626
Analog Input HART module, 16 channels single ended, 8 channels differential,
channels are configurable for voltage,current and current/HART. Supports
Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.

IC695ALG628
Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/HART. Supports Current: 0 to 20mA, 4 to 20mA,
+/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.


RX3I ANALOG OUTPUT MODULES

IC694ALG390
OUTPUT MODULE ANALOG 2 POINT VOLTAGE
IC694ALG391
OUTPUT MODULE ANALOG 2 POINT CURRENT
IC694ALG392
OUTPUT MODULE ANALOG CURRENT VOLTAGE 8 POINT
IC695ALG704
Analog Output Module, 4 channels,that is configurable for voltage and current,
configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC
per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC

IC695ALG708
Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity terminal block IC
IC695ALG728
Analog Output HART Module, 8 channels,that is configurable for voltage, current,
current/HART configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10VDC, 0 to 10VDC per channel non isolated. Up to 16 bit resolution. Requires high capacity ter

IC695ALG808
Isolated Analog Output module, 8 channels, that is configurable for voltage and current

RX3I MIXED MODULES

IC694ALG442
ANALOG COMBINATION MODULE CURRENT VOLTAGE 4 INPUT

RX3I MOTION MODULES

IC695PMM335
PACMotion motion control for series RX3i
IC695FTB001
Fiber Optic Terminal Board for PMM335
IC694DSM324
DSM324 motion controller module for the RX3i
IC694DSM314
MOTION CONTROLLERMODULE 1-2 axis Digital Servo or 1-4 Axis Analog Servo
IC694APU300
HIGH SPEED COUNTER MODULE 200KHZ A B AND C TYPE
IC695HSC304
RX3i High Speed Counter, 4 channels
IC695HSC308
RX3i High Speed Counter, 8 channels

RX3I COMMUNICATIONS MODULES

IC694BEM331
RX3i Genius Bus Controller (supports I/O and Datagrams). Module connects to the
serial bus. Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition
Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration

IC694DNM200
DeviceNet Master Module for RX3i. Module can only be located in
the CPUbase. The module is on the high speed serial bus.

IC695CMM002
Serial Communications Module, 2 ports
IC695CMM004
Serial Communications Module, 4 ports
IC695CMX128
PACSystems RX3i Control Memory Xchange 128MB Memory
IC695ETM001
Ethernet module 10/100 Mbits 2 RJ45 connections one IP address
occupies one slot on system base

IC695NKT001
RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module
(IC695ETM001). ENIU supports two serial ports and 20k of local logic.
TheENIU must be installed in a IC695CHSxxx base.

IC695NKT002
RX3i Ethernet NIU Kit with two Ethernet modules
IC695PBM300
RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). The module
supports PROFIBUS V1 Master functionality. The PROFIBUS Master module requires an RX3i CPU with firmware version 2.9 or later. This module must be located in an RX3i Univer
IC695PBS301
Profibus Slave module that supports V1 functionality. The Profibus Slave module
utilizes the RX3i PCI bus and will only work on the RX3i Universal base.


RX3I TERMINAL BLOCKS

IC694TBB032
Box Style High Density Terminal Block - 36 Connections
IC694TBB132
36 Point Terminal Block,box style extended depth shroud. Compatible with new high
density I/O modules for both RX3i and Series 90-30

IC694TBS032
Spring Clamp Style High Density Terminal Block - 36 Connections
IC694TBS132
36 Point Terminal Block,spring clamp style extended depth shroud. Compatible with new high density I/O modules for both RX3i and Series 90-30.
IC695FTB001
Fiber Optic Terminal Board for PMM335

RX3I ACCESSORIES

IC694ACC300
INPUT SIMULATOR MODULE 16 POINTS
IC694ACC310
RX3i Blank filler module
IC695ACC600
RX3i Cold Junction Compensation Kit \ for Universal Analog Input IC695ALG600
IC698ACC701
PACSystems CPU Lithium Battery and Spare Door


CMT Engineering Oy, Kaakkoiskaari 18, 53500 LAPPEENRANTA, FINLAND
Tel: +358(0)10 - 239 0070, Fax: +358(0)45 689 1148